Electric hot water boilers are essential as one of the basic everyday appliances. But many people don’t know how to choose a fully functional and safe electric water boiler, and if you are also confused, this selection guide may help you.
1.Choose the appropriate capacity according to their own use habits and actual needs, however, do not blindly choose too large capacity.
2.Carefully check the logo and description of the product. According to the standard, the product identification shall be complete, including: enterprise name, address, specifications (such as capacity), model, trademark, voltage parameters, power supply parameters, power supply attribute symbols, etc. There should be warnings against misuse, detailed cleaning methods, etc. The operating switch marks on the product shall be clear and reliable.
3.Look at the appearance. Thick plastic and smooth, glossy and beautiful products are of relatively better quality, reflecting the quality of the poor. In addition, the electric kettle is used for water injection electrical appliances, the purchase should pay special attention to its sealing situation, can not have leakage phenomenon. If you can see the heater, pay attention to the interface between the heater and the pot body when buying. It should be installed firmly. The heater can be gently moved by hand to check whether the assembly is firm and should not be loose.
4.Choose the products with the temperature control function. For products with temperature control function, it will automatically turn off the power supply after the water boils, which can effectively prevent the dry burning caused by unmanned operation and avoid accidents.
5.Try the boiling water. You can add the right amount of water to test the electricity to boil. After the electricity, the pot body becomes hot, and the products with high nominal power become hot faster.
6.Select well-known enterprises with large scale, good product quality and service quality. As large manufacturing enterprises are strict to control the quality of raw materials, parts and products, have advanced production equipment, the enterprise management level is higher, and the product quality and after-sales service are more guaranteed.
7.Electric kettle is a liquid heating appliance, is listed in the national mandatory safety certification (CCC) catalog of products. When consumers in the purchase, must see their electric kettle to have CCC certification mark.
At the same time,when using an electric kettle, it must first be filled with water and then energized. Do not energize it before flooding it with water. At least fill the kettle at the lowest water level, but shall not exceed the specified maximum water level. Do not use an electric kettle to boil acid, alkali, salt ingredients, so as not to corrode the pot body and heater.
Electric kettle every time burning milk, coffee and other things, the electric heat pipe may be attached to a layer of residue and dirt, every time after the use of carefully clean. For a long time, the kettle or electric heating pipe surface will be attached to some scale or other dirt, to regularly check and clean up. When cleaning, the electric kettle should not be immersed in the water, so as not to affect the electrical insulation of the automatic switch.
