With the continuous improvement of people's requirements for the quality of life, the use of household appliances is also increasing. For example, the use of water has always been an eternal topic of discussion. At present, a new way of drinking water has appeared on the market, that is, using a smart electric kettle. Did you know? The following is an introduction to the smart electric kettle products and operation methods. Let's take a closer look with the editor.
The smart electric kettle, known as the "fast electric kettle with water and disinfection", not only can automatically pump water and boil water quickly, but also has the characteristics of intelligent temperature control and intelligent constant temperature, and can also sterilize tea sets. The complete set of products includes kettle, sterilizer, base, control panel, silicone hose, dust cover, faucet, etc. Usually used in hotels, guest rooms, homes, and other guest self-service water-boiling scenarios. Generally, there are separate power supply base, automatic water boiling switch, water level indicator standard, power indicator light, drying protection and other safety devices. The general technical index is about 950W, the water capacity is generally less than 1 liter, and the voltage is 220-240V.
How to use a smart electric kettle
1. Put one end of the silicon hose on the water inlet at the bottom of the foundation, and put the other end into the drinking water bucket, then install the faucet in the corresponding position of the foundation, align the position, there are 3 card positions, rotate the fixed kettle and The sterilizers are placed in the corresponding positions of the foundation.
2. Plug in the power supply; press the main power switch by hand (long press for 3 seconds); open the lid, press the "automatic pumping" button, after 0.6L of water is automatically drained, it will automatically stop adding water, there is a water level line in the kettle, The capacity of the pot should not exceed 1.2L; add an appropriate amount of water to the sterilizer, and press the "sterilize" button to sterilize.
3. Press the "Temperature Adjustment" button, the water temperature can be freely adjusted from 40 degrees to 99 degrees, to achieve different water temperatures for different tea leaves, press the "Automatic Tea" button to enjoy different brown tea aromas, the water temperature can be automatically within 4 minutes. Heating to 100 degrees, maintaining a constant temperature, to meet the needs of fast boiling water.
Through the above introduction of the editor, I believe that everyone has understood the introduction and operation of this smart electric kettle. Now everyone has put forward higher requirements for the drinking quality of tea, and the use of smart electric kettles is definitely a very good choice in our lives.
