The electric kettle will produce scale after being used for a long time, so it needs to be cleaned at this time. Pour vinegar and water into the kettle at a ratio of 1:2, then turn on the power, let the electric kettle boil, and wait for it to automatically power off. Put the mixture in the pot for 24 hours and then pour it out, then add clean water to clean it. If necessary, repeat the above operation.
In the process of using the electric kettle, if there is a fault, take the kettle out of the heating chassis, pour out the water in the kettle, and then cool it to normal temperature before performing fault detection or cleaning.
When using, please pay attention to electricity safety. Before use, check that the voltage matches the voltage on the nameplate (at the bottom of the pot). Do not use without adding water to prevent dry burning. Make sure the power base and connectors are dry to avoid the risk of electric shock. Do not touch the contacts in the power base with metal objects while the power is on.
Many friends are easily scalded by steam when they use an electric kettle for the first time. Be careful when the water boils to prevent scalding from the steam. Because the temperature of the water vapor is very high when the water is boiling, you should avoid using your hands or other parts of your body to touch the gap between the spout, lid and handle to avoid burns.
Electric kettles are usually used to boil water. Do not heat sticky foods (such as milk, etc.) in a kettle. When working, you need to be within sight and avoid children's touch to avoid accidents. When the kettle is powered on, do not lift the kettle or pour water. Turn off the power plug when you stop using it.
The use of the electric kettle is very convenient, and the use process is also very simple. Today, many households use electric kettles to replace the traditional way of boiling water. Any electrical appliance will have certain potential dangers during use, and we only need to pay attention to safety to use it well. The electric kettle cleaning and maintenance methods are introduced here, and I hope to help you.
